THE KIT
THE PIPE BOMB IGNITION POD
The Pipe Bomb is a ignition pod that comes with everything you need to wire your xs 650 up and utilize your stock starter motor. You can either wire it as a car type starter or you can use it as a on off switch for your bike if you are going starterless. You decide where to mount it and just weld on the pipe tab where you want it, drill a 5/16 hole for the wire grommet and a 3/4 inch hole for the ignition. 1 15/16 I.D/2inch O.D tube 3 1/2 inches long plus end caps, bracket if you want to bolt it on and grommett to run your wires thru. Simple/ easy/ effective *** MADE IN THE USA
The Brat Kit consist of high quality D.O.M tube and heavy duty brackets with solid slugs machined down. Made in the U.S.A. This kit gives the builder a lot of flexibility in building their own one of a kind xs 650. We are proud to say we have the first and only kit on the market. Our customers are loving the kit and the ease of installation as well.
$35
GASSED
We are proud to offer our fuel site guage kit. This kit is made with premium parts. We use stepped steel bungs made in the U.S.A. We also use the best clear fuel line on the market. This is also made in the U.S.A and it doesnt break down like the cheap stuff other kits give you. We use fuel fittings made in Canada. These fitting are a very nice finish for your bike you spent all that time making so nice. The details make all the difference so why not get a kit that has been put together with the details in mind. The price is damn good too and the lowest on the market.
$30
free shipping when ordered with a brat kit
***Note:All ignition switches are pre tested before going out. Due to the nature of the part we cannot accept returns.
VISUAL IMPACT SHIRTS
Click pic to view front and back of shirt
POWER PISTON BRAKE /RUNNING LIGHT AND PLATE MOUNT
Description : We are proud to offer "The Power Piston" from our buddies over at TEC. It is super bright with 25 Red LED's. Comes with Tail/Brake lighting option. Hard wired so you can add to any bike. The piston is made of Quality Aluminum. The piston can be polished if you like the bling bling or leave it as is for that raw look. Comes with a Red lens and a wire mesh screen to give it a old school look. You can remove the screen if you like the red lens look. Also comes with license bracket that is CNC cut from thick 10 gauge steel, then powdercoated black. The bracket is made with three large "lightening" holes to save weight and give them that rat rod look.
Also MADE IN THE USA!
$12
$139
If you buy from us, take a second and tell us where you came from so we can better serve you with new and exciting future products.
Pre Welded Brat Kit
The kit now comes in a prewelded version. You will still have to cut and weld but all the tough stuff is out of the way. You will need to drill a few holes,install and weld the supplied plugs and weld the prewelded back end to the bike. Its basiclly the same process as buying a prewelded hardtail. Some assembly is required. The prewelded tail also comes with a front seat mount plate welded on at no charge. This is a great option for those who are worried about getting the layout right.
$210
PREWELDED ARE MADE TO ORDER. APPROX. WAIT IS CURRENTLY 2 WEEKS OR LESS
